Taking a look at today from the light is this galaxy s4. It has a shattered display and a chipped and marked frame. Now I actually got two of these in the lot so I’m going to be working on those today. I will only be restoring one of them, but we’ll get into why I needed both of them later in this video. For now, I’ll need to restore this Samsung Galaxy s4 back to factory settings, and that is done by holding the home button and volume up key while pairing on the device and will boot into Android recovery from there. You can actually factory reset the device which will wipe all of the content and all the passwords off of it and you’ll be able to set it up as a new device, which is what I had to do. As this was a phone that was sent to a recycling center, but it still had somebody’s dollar on so I went ahead and wiped that, and now I can set it up as a factory device doing that I can make sure the device actually functions which it Does – and you can see here – everything seems to be working other than the damage to the screen and frame of the phone. Now I can shut down the device and begin working on it to remove the battery it’s very simple it just unclips from the phone once you remove that back door, that’s a really neat feature about the s4 s and S 5 s and a lot of the Earlier Samsung phones – there is a few today that you can buy that actually still have removable batteries, but it’s something Apple, never did go out to Samsung for actually having that as a feature for many years, you’ll need to unclip the frame after removing the screws.

You can see there’s a few components on there like the speaker, which will actually remain on that mid frame. Next, I can start to disconnect a lot of these cables that go to different parts and components in the phone. The home button itself is connected on to the dock connector, so that will need to be unplugged as well. I can undo a heap of flex cables on the motherboard itself and there’s one screw actually holding the motherboard into the frame and once that’s removed it’s. Actually just held in by the cables, so it falls right out. The first thing that I noticed when removing this board that a lot of people probably missed was that the power button and volume buttons are soldered directly to the motherboard of the phone, so whether the battery can be replaced easily by the user, isn’t really important. If the power button stops working and would require micro soldiering to be repaired now for this repair, I do need to transfer everything inside of the frame into the new frame, which also houses the replacement display moving along to the dock connector. Thankfully, that is removable in a separate piece, so if it needed to be replaced, that’s very easy to do, which is something that can’t be said about the Samsung Galaxy S 10 as that’s one piece and is connected directly to the motherboard. So it cannot be easily replaced with all of the components removed from the old display, it’s time to reinstall them into the new display.

Now you may have noticed nothing appears to be screwed in now, that’s, actually because the outer shell, that screws down actually tightens and holds in place everything inside the phone. So once you remove that everything sort of is just sitting inside the phone, most of the components are quite easy to get to and aren’t very hard to remove at all. The only downside to this phone is its plastic build construction, but I guess that makes it a nice way to be able to easily replace that battery with all the little parts and components installed. I can reinstall the motherboard back into the phone and get everything connected up, so I can test out the phone and make sure it’s still working I’d like to say at this point in the repair. Everything was going fine and was very simple and easy to do. I didn’t run into any hiccups until I tried to connect the display. It appears that the connection wasn’t the same but at a closer inspection and appeared that the cable was just a slight bit higher. So with some repositioning it connected and I could test out the phone you can see that it’s functional the screen is working, the touch screen is working and, if appears to be fine, so it was time to reinstall the back of a phone to complete the restoration Of the device with the mid frame clipped in, I could reinstall the screws holding in the frame itself and transfer across the label itself, which contains the IMEI and serial number for the phone, which is just a neat.

Little thing that I’d like to keep attached to the phone, I can reinstall the battery and back door now it’s time to flip it over and test out the phone pressing and holding the power button. I found that it was completely dead and didn’t show any signs of life that’s, never a good sign. So I cracked open the phone again by removing all of those screws and putting in a test battery again holding the power button and mysteriously the phone turned on again. So whilst it was on, I decided to clip in the back of the phone, as that was obviously causing the issue clipping it in it seemed to be okay at first until I saw a flicker on the display, they got me a little curious, but I kept Pressing and it’s dead completely unresponsive on the display. There seems to be something seriously wrong, not to fear I connected up the original display, because I thought maybe the connection on the motherboard itself was faulty testing it out with the spudger it doesn’t seem to be affected by anything. So I cracked out a second Galaxy. S4 smartphone that I had laying around from that same part slot. I thought I’d, give it a go with that display, given it has a slightly different model number now little did. I know that there’s two different editions of the Galaxy s4, which have entirely different CPUs and I’m guessing. That is the issue with the display I’m, not sure exactly why that is but we’re going to test it out with this phone to see.

If this makes any difference, so I’ll need to go about the same process as I did the first time to completely tear down the device now, as I’ve transferred across most of the components, I’ll only need to transfer across the motherboard at first to see. If that makes any difference, the phone on the right is the one with the new display that we just installed. That is having the issue and the one on the left is a 9500 and 7 Series, s which we’re going to be trying out and seeing. If that makes any difference to my eye, I can’t tell the difference between the two models of s4. To me, they both look the same, but obviously there is some internal differences with the CPUs and some of the chips used with the board now swapped over. I can connect everything back up and install a battery pressing and holding the power button. I get this weird screen where it just sort of detects the battery, but it just won’t turn on and that’s, never a good sign either I mean we’re getting more than last time, but it’s still not working. So out of curiosity, I disconnected the dock connector and sure enough the phone powered on and functioned so it turns out the dock connectors between the two models of Samsung Galaxy s4 aren’t compatible. So, if you’re looking to repair one of these make sure you get the right parts for the right model, number of s4 that you’re working on because connecting up the dock connector that came from the original frame, the phone panels on just fine and I can reassemble The phone back up, although I still don’t, know if the frame will interfere with the display, like it did with the previous s4, that I attempted to repair with the screws installed.

I can put the back on pressing and holding the power button. It displays the Samsung Galaxy s4 logo and once the phone’s booted up it works flawlessly like any s4 should so it goes to show that you need to get the right display and right components for the model of galaxy s4. The you own, I didn’t, realize this at the time, but luckily I had two of these, so I ended up getting to fix one of them, although I will be fixing the other one in a later video. Now, though, I can remove the plastic film and cover from the Samsung logo and we’re done so this is it a fully restored, a samsung galaxy s4, which cost me 10 to purchase and with a 65 display replacement and new battery, this s4 looks and performs, like New in terms of repairability Samsung displays always tend to be a little bit more than iPhones of the same age, especially in the older generations, so that’s, always a downfall. The batteries in these older generation Samsung’s are replaceable, which is great, but obviously the lack of replaceable buttons can result in very difficult repairs to be able to fix small issues like a broken power button. This device is running Android 4.3 as well. I should also mention that you may notice the display flickering on the video itself, that’s not happening in real life. That is just my camera. Picking up the refresh rate of the display, it has no issues with the display coming out, like the other one, given its different model number, which appears to be for an Australian iPhone, which this s4 is.

If you keen, on seeing more Android videos, they’ll, be coming out in the upcoming months with the purchase of lots of Android phones that actually got given an LG G 6 as well as well as an s5 AJ Pro another S port and an exterior X, which Will all be coming in later, videos so make sure you stick around for those, and on that note this has been a huge EFI’s video if you liked what you saw hit that subscribe button and consider checking out the phone, restoration and Android restoration playlist for more Videos just like this one also make sure to follow me on my social media link, for which is down in the description that’s all for this video and I’ll catch.