Odroid Go Super First Look, Test & Dărâma
Colonel just announced that this will be releasing at the end of january 2021 and if you’re not familiar with the odroid, go advances in general. This is the last one that was released personally i’m. A big fan of these little handheld units and the odroid go advanced black edition, which i have right here, are o 3.5 inch ips display, quad core arm cpu and one gig of ram run several different operating systems, but the main claim to fame to this little Unit is emulation now they’ve made some changes with the odroid go super and one of the main changes is the size of the unit. Like i mentioned, the odroid go advance or the black edition has a 3.5 inch ips display. This one’s been up to a 5 inch ips display with a higher resolution now inside of the box you’re going to get your usb type c cable for charging the unit up on the back here. După puteți vedea, we do have some ventilation for that. Cpu single speaker setup, but if i turn this thing around, you can see that the screen on this has definitely been upgraded, not to mention the extra analog stick here. Personal, i love the way they’ve set this up. We do have four triggers up here and by the way it does have a glass screen cover on it straight out of the box. So we don’t have to worry about this thing. Scratching up, like the older plastic, one on the odroid go advance and the go advanced black edition, so they’re going to be offering this in two different color variants.
I chose the gray one here, but they also have a crystal clear version which can be painted from the inside, like we did with the older odroid go advance so overall, first impressions on the screen, it looks great now it’s been up from 480 de 320 on The original to 854 de 480, so we do have a higher resolution here. Like i mentioned it does have a tempered glass cover and another upgrade they made over. The original was instead of a 3000 milliamp hour battery, this one’s rocking a 4 000 milliamp hour battery. Acum, as you can see on the front here, we do have a d pad: dual analog sticks a b x y. We also have start select and four extra menu buttons at the bottom, and these can be programmed in software there’s. Several different operating systems that we’ll be able to run on this, like bottocera emu elect, but one of my favorites is ora and i was lucky enough to receive an early version that fully works on the odroid. Go super so, along with all the forward facing buttons up top here we have four trigger buttons: l1, l2, r1, r2, full size, usb port, usb type c, A 3.5 mufă pentru căști milimetrică. Our volume buttons some gpio pins here for adding extra accessories down the road and our power button moving around back. We do have more ventilation for the cpu, and i can actually see the cpu through this little grate.
Here we will be able to add a heat sink to this, which is something we couldn’t do with the original odroid go advance, at least without some modification it’s, a single speaker setup, i kind of wish they would have added stereo to this, but i will have To see how it sounds when we get everything up and running and finally on the bottom here we have our micro sd card slot, and this is what we’re gon na install our operating system on and our games to run it from just to give you an Idea on how big the super is, i wanted to compare it to some other handhelds that are on the market right now. First up we have the original odroid go advance. Ei bine, actually this is the black edition. Next up, we have the rg 351p from amber knack. The retroid pocket 2, a full sized nintendo switch and one of my favorite handhelds of all time, the switch light. După puteți vedea, i mean it’s, definitely on par with the size of the switch light, so it’s still a little early for the software. I have on the odroid go super, but i still want to test a few things out and then we’re going to get into a quick teardown, but real quick let’s check out the specs for the cpu. We still have that rk3326. This is a quad core, cortex 835 cpu at 1.3 Gigahertzi. The gpu is the mali g31 one gig of ram 5 inch ips display 854 de 480 and as for operating systems, all of the builds will be based on linux, but will have several to choose from botocera emu, elec, laca, ora and there’s a few more over On the website that i personally haven’t tested out because there’s a plethora of them, but for this video here i do have an early version of ora that does work with the go super, so let’s go ahead and test a few things out all right.
Deci, după puteți vedea, i mean there’s a ton of systems listed here and it doesn’t mean that every single system is going to run at full speed. We have taken an extensive look at what the rk3326 can do and that’s exactly what we have in this unit here. The main changes between the super and the original odroid go advance are the addition of that extra analog stick and the much bigger screen and battery, but i still wanted to get a little bit of gameplay out of the way before we do a tear down because I’M really interested to see how they have this one put together. First up we have some neo geo, then we’ll move over to dreamcast and then swap over to psp and after that, we’ll do a teardown on this unit: Muzica, Muzica, Muzica, lady of the american stage. ok, all right so performance looks about the same as the original odroid go, advance, let’s go ahead and give this a tear down and just take a look inside of it looks easy enough. We have seven screws on the back here and one thing i didn’t notice earlier was this reset button. It can be pressed with a screwdriver or a paper clip in case. You need to hard reset this unit at any time, so i’m gon na go ahead and get these seven screws out and see if we can get the back off of this thing all right, so it looks like we should be able to pull this right off And the only thing attached to the back cover is the speaker itself.
Let me go ahead and unplug this from the main board, and i just pulled it out of the back anyway, so it wasn’t glued in or anything like that. It kind of snaps into place, and i mean yeah overall. This has definitely been totally redesigned. We have that 4000 milliamp hour battery here and it looks like the analog sticks are actually attached to the main board itself. With these little plastic adapters, i think that’s going to be the case here and on the original odroid go advance. The analog stick was actually screwed into the upper side of the case, so i do think they’ve attached both of these to the main board itself, and if these analog sticks are attached to the main board, i will not have to unplug them. The only thing i’ll have to unplug here is this lcd ribbon, cable, which i need to be a little careful with so i’ll go ahead and pull these tabs up here on the lcd ribbon cable, and then we have two extra screws that are holding the pcb Inside of the front half of this shell i’m going to go ahead and get those out and then see if we can remove this main board. So i definitely want to be careful with this. I just need to make sure that nothing else is attached, because this is the only unit. I have right now, i’ll go ahead and get that ribbon cable out of the way, and this should pull right up so yeah that looks good.
We have that five inch ips screen here attached to the front half of the shell. It does have the rubber membranes on the a b x y button and the d pad, so these could be replaced down the road if you ever needed to, and just as i thought, those analog sticks are attached to the front of this pcb so yeah they’re Screwed in from the back they’re not going to go anywhere, you don’t have to unplug them. When you do a disassembly – and it looks like the pcb is marked with odroid go 3, but this is known as the odroid go super, so yeah they’ve definitely done a great job. With this pcb that 4000 milliamp hour battery is attached to the main board itself and it’s not going to get in the way of the ram and the cpu like on the original odroid go advance and by the way when the shell is on this, we do Have enough room to put a heatsink on that cpu, so hopefully we can get a little bit of an overclock out of this in the near future, and i’ll come up with a heatsink solution for this unit. I do have a ton of them laying around. I just need to see which one’s going to fit underneath this back shell, so in my next video we’ll, take a look at that also so far i’m, a real big fan of the form factor.
I love the fact that we have a much bigger console here with that big five inch screen. I do wish it was four by three but they’ve added a 16 by nine aspect. Ratio screen to this, so adding bezels to retroarch is definitely going to be a must have with something like this, especially when we’re playing those older games that are meant to be played on a 4×3 ecran, because we’ll have those black bars on the side. But with just a little bit of software tweaking we can get some nice looking bezels added to this thing and we still have a much bigger play field than the older odroid go advance a couple things i wish they would have added here a second speaker. So we could have got stereo sound out of it and wi fi. Din păcate, this does not come with any wi fi at all. Pre installed not even 2.4 Gigahertzi, so you will have to add your own usb adapter and that’s why they left that full size usb port on the top. But there are some pretty good 5 gigahertz adapters out there. That will allow us to steam, link and moonlight with relative ease on this console, and the last thing i would have loved to see being changed in this unit is the whole cpu and ram setup it’s using the same exact cpu and the same amount of ram As the odroid go advance now when it comes to the amount of ram, one gig is definitely plenty for a retro console like this, but it would have been really nice to see an upgraded cpu in this unit.
So we could have played the harder to emulate stuff easily on the odroid go super, but i completely understand that it would have taken a lot longer to r d, something like that and when it comes down to it, we already have some really decent software. That can be easily ported over to this unit. Developers, basically just need to factor in that extra analog stick and the larger screen size. So it should be easy to bring all of the operating systems that run on the odroid. Go advance to the odroid go super, but that’s gon na wrap it up for this. One really appreciate you watching just wanted to give you the first look at the odroid ghost super. I personally like the console. Hopefully we see some more developments happen with this unit. Here and it’s, just a matter of time before we get all of that great software ported over here, i will be doing a couple more follow up videos, so if there’s anything else, you want to see running on this unit. Just let me know in the comments below and if you’re interested in getting your hands on. One of these definitely keep an eye on hard colonel’s website. I’Ll leave a link in the description they’re, stating that these are going to go for 80 and they’ll be available at the end of january 2021.