Evetech RIX case review
Goed, vervolgens, get yourself an eve, tegrex Music good after morning, and welcome to turbo tortoise tech. If you’re new here, my name is rusev peace from kfc, a wookie triple xl and in this review i’m, obviously having a look at the utec rigs it’s built like okay, like the proverbial brick beep house, Oke, starting off with the package contents, you get quite a Nice little kit from e tec, you get ample amounts of screws and fastenings and some extra cable ties and that some other goodly things you also get a controller for your fan kit. So if you don’t have a reversible rgb, then you can control it from there and you have to control the speed of the fan kit itself from that controller as well, two little things that they threw in there that i really liked was the badge that actually Sits right here on the bottom in the front, that’s actually loose inside the package, so you can stick it wherever you want. I just thought it looked really nice up front with that. You take logo at least trying to get it matched and aligned with the fans in the center there, as much as i possibly could and then there’s a standoff adapter. Now this one is actually a little bit better than the other ones i’ve ever gotten, because it’s actually like a thumb screw as well as it has a screw point on the back of it. Most of them are just the adapter itself and you have to use it with a screwdriver.
Nwo, if you don’t have a very good strong magnetic screwdriver, it can become a little bit finicky to do, but having it all in the thumb. Screw means that you can start it with that, and then finish with a screwdriver and honestly on about seven of the nine fastenings for the full atx motherboard. I literally just used that to fasten it pretty tightly. I went over around it, but there was only two that i couldn’t actually get very tight. Dat gezegd zijnde, i do have the grip strength of a lowland mountain gorilla. Speaking of the case layout itself, Hoewel, the eve tech’s done a phenomenally good job in a number of areas. The look and feel of the case is absolutely fantastic and, as i’ve alluded, it’s built pretty damn tough the panels all fold over each other and 90 percent of its aluminium. It weighs considerable amounts with the other sort of ten percent. Oke, let’s say 70 30, with another 30 of it being made from glass, so it’s it is a hefty boy. The standard fan controller setup is two 120s up front, with four coming out the back i’m, not the biggest fan of having more out than in, to be very honest with you, so i do think it could be optimized slightly by putting one of those in the Front you won’t be able to see it because it’ll be below the shroud point over here, but there is space for full 360 miles worth of fans, or at least three 120s and three 120s and then another 120 at the back.
So airflow considerations of the case are pretty damn good and it has was one of the concerns i saw about the case on some of the comments on the launch was that, with the full front panel it’s not going to have much airflow well to combat that There is a huge port on the top over here and then the another identical one at the bottom to assist, with making sure that there is enough intake. The remainder of the layout is pretty standard. There is a full shroud for the psu. I actually would have liked a little window over here. Maybe just to you know, show off the power supply you may have. Als je wilt, myself and you’ve got a thousand want 80 plus gold cooler monster, big boy, it might be nice to show that or perhaps perhaps a little bit nitpicky. I know i i i can feel how you’re looking me right now uncle yvette, please don’t. Take my head off, for you know making that suggestion. Ik hou van jou. The drive loud is also pretty standard. There’S two 3.5 inch removable racks at the bottom, which are really nice in the face that they’re quite standard nowadays in this sort of setup, screwless design as well to mountain and mount them, which is really nice and then the 2.5 inch spaces. De 2 2.5 on the back end over here by the motherboard now there’s. This whole wall here in front of the cooling area at the front or in front of the fan, ports and quite a lot of space.
So i was thinking, maybe add another two on the back over there, just as an idea. The the cutouts, Hoewel, for the fan or for the cables at least, and the fan, cables etc, are really nicely done. Everything was where i would like to to have run through and the side ones, though maybe throwing some garrets on those uh it’s, not the end of the world. It doesn’t look untidy as it stands, Hoewel. So once again, maybe me just nitpicking now. If you’ve noticed, there is quite a lot of room in the front of this case, this thing lends itself to a push, pull radiator design, voor, Ik zou zeggen, een 240 Aan 360, just based on the clearance that’s sitting there at the front, you’re not going to Get a full push pull with a 360 op dit punt, but a 240 upfront with a full push pull is very, very realistic, it’s it’s more than realistic. Dit is een 5600 xt asus tough edition it’s, not the shortest card. Ever it’s, probably a 280 mill i’ll i’ll check the exact size for you and put that on screen, but it’s it’s, not a short boy, and there is a chasm i mean, like literally the grand canyon worth of space in front of that regarding the remainder of Its clearances, the only one that was a little bit tight, is actually the breadth of the case itself. The piper 212 is not the tallest tower cooler you can buy.
It is on the on the sort of higher average end, but it’s it’s not uh, like a noctua that or be quiet that’s like well, that this kind of large and it just just fit there’s, probably about two millimeters worth of clearance between that and the glass At this point, Hoewel, i just have to reiterate how pretty this case is. The led beam through the bottom is just such a nice touch, the dual ringlet and then fan lit leds are fantastic, just the homie at the factory that’s putting the stickers on. Please put them on straight for all of us bro, please and lastly, regarding the physical setup of the case on the top in here, you have the power button. Then you have a power led and a hd led, which i thought was very cute for them to include a power led with all of this going on. I think you’ll know if your case is on or not with this amount of rgb there’s, two jacks for the mic and for the headset up front and then two usb 3s, which is quite nice. Then the reset switch is actually connected to the controller. So at the moment, bijvoorbeeld, it’s hooked up with the motherboard, zoals u zien, and it’s scrolling through the default rgb, well the maximum rgb setting that i could put in the dragon center. But for the press of a button i can actually change it onto a different mode and there are a plethora of modes i mean i could probably do a three four minute video just on how many lighting profiles they are built into this controller.
So there’s a nice to have there if you do lose your remote control. At least you can control the rgb for over there on the case, but the fans themselves have to be controlled from the remote. They can, echter, be switched off entirely, which is the first i’ve i’ve not actually had one of these included kits. That can actually turn them off. So if you are just watching a movie or something to that effect or watching some youtube related nights, and you want absolute silence, you can literally turn the fan kids off, in which case you basically had nothing because of like this thing is thicker than a snicker. Okay last thing just to note about this is that the it is like stilted up, so it is standing up. So there is plenty of room for air to clear in right through underneath the case. So even the air that’s going into the psu has a really nice channel into it. So moving on to performance and the test setup so in here is a 9600 kf which is clocked at 4.6, gigahertz or core, and then i do have the 5600 xt tough edition, which i’ve done no overclocking on because 5600 xt, since the bios update basically done Overclock anyway, 3200 megahertz memory cl 16, dual channel kit of the good, clear variety, very good stuff. This clips stuff it’s, actually superb it’s, actually better than my corsa kit. To be very honest with you, and then i do have a very generously sized 2tb nvme from old hick vision.
All of this is being powered in by the 850 watt high current gamer from ntec. So what i did was i kept the build on the test bench on the open air to see how the components perform without any interference and then put them into the case to look for any differences. And what i found was that basically, there were almost none. What’S, especially impressive, Hoewel, is i left the ida 64 with it in the case, much longer than i had on the test bench and the averages were pretty much the same, if not better, with the case, and once again, this is without sort of an optimized airflow System, if you were to put the other 360 in the bottom and have that as an intake take one off the top and remove it, i mean the cables and everything that go to the fan. Kit are more than long enough to do so. Then you’ll actually probably get even better performance. I just wanted to test it in the default layout, so you can see what you’re getting out of box, but with the rd64 and with the fire strike stability test, the scores were literally almost identical. I did do some gaming as well mate brought over a monitor to test, so we had a good run through cs and metro and a couple other things and the machine never skipped a beat and it doesn’t have. This is as loud as it gets and to finish off their thought i’m, going to actually jump over quickly and show you the airflow of the machine itself and then the decibel meter.
So you can see how loud the machine is, Applaus, dus Muziek. Tot slot, vervolgens, Geloof ik, if tech’s actually knocked it out of the park with us it’s a really really good base platform. The case is built like absolute stink. The the best value of the system is the case itself, which is exactly how it should be fan. Kits and all of that sort of stuff will be replaced over time. You know it’s a moving part it’s got a bearing dust, can get into it, there’s a whole bunch of things that could happen to decay, your fans and kill them. Uiteindelijk, aan het eind van de dag, but this metal and the way it’s painted and everything good luck. This thing is so hard. If it fell off a two story, building it would dent the ground. The grass would probably the glass the grass the glass would probably break. I mean all things considered, but yeah it it would. It would bounce i’m pretty damn sure, because it’s it’s hot it’s so hard. If you look up granite in the dictionary, rick’s is listed there as a case example anyway. That is all i have for you in this review.