This is the fs flight submits light, affordable cockpits. It has all the mouth points for your peripherals in the same footprint as a gaming chair, making it perfect for all of us with limited space. Let’S have a look inside, shall we so so here’s the frame and here’s the hardware to put together let’s? Have a look through the manual for a full instructional video for next level racing on how to put it together, you can click on the card in the top right corner of this video one thing worth doing is going through the manual manifest and matching up your Bolts, nuts and screws with everything together as one thing that will save your heartache later on, is looking for the right pieces using the wrong piece in the wrong place, and so it’s high recommended. You just match everything up, one by one lines: all up. Have it all visual ready in front of you to go through the manual you’ll, also notice that the nuts may not feel like they quite go on tight, but basically inside you can see the little blue ring in there that’s an anti shake plastic bush plastic ring That stops it from coming loose and makes it nice and tight when putting all together. If you can also pay someone off of a couple of bids. To give you a hand, then certainly do that too so here’s one i made earlier. It was time for me was around two hours.

Assembly was not difficult, but it is worth noting. On my use at least the arm adjuster plates do need a little bit of persuasion and also do not over tighten the rotation harps and that levers do all the work. I would highly recommend you watch the video all the way through before you start and get an idea of the basic assembly. Now all that’s left me to do is to mount my peripherals to the chair. So here we have the next level rising fireball flight, simulator, cockpits all set up and peripherals mounted at the bottom. We have a set of logitech runner pedals, combining my trusty thrust. Master watt target stick and throttle, and also a borrowed uh honeycomb yoga system. For my brother, which all goes together to create the type of scene now for me, usually i stick with the stick and throttle, and so on. The main unit here i’d go for a cube stuff that i can use in front of me and with a nice little mouse edition for the right hand, side armrest made for nice little compact units. There should be quite a lot of fun to use so i’m. Not going to do is hook this all up, set it all up and give it a go with a microsoft flight center itself. With everything put together, we are left with a nice selection of nuts bolts and washers to mount our peripherals. It even includes an adapter for the thrust master tpr rudders 500.

. Overall, i do rather like the chair. It is comfortable to sit in over long periods which, for long hauls and jetliner flights will allow for time to sit back and relax while also being positioned in the way i can easy to take, control and fly the arm. Control, slides are also adjustable too, meaning that you can move these backwards and forwards based on your sitting position and arm lengths. The rudder slide is also very well put together. You can apply a fair amount of force to the pedals without the fear of pushing them away from you, especially the most crucial moments of crosswind landing. The only thing i don’t quite get with the seat is the function of the twisting, tightening and loosening of the rotation hubs, they’re a smart design and do work rather well, especially once you’re in a chair, but i do find them rather fiddly at times and something I will need to spend a little more time with to get just rights, whether i’m flying a prop craft, low and slow or jetting off in something a little more sizeable. The next level racing flight, simulator cockpit, does its job rather well and being foldable when you’re done at the end of the day, just unclip the hubs fold it down to be stored away for next time, so don’t sink don’t sink. If you think that this chair may just be the one from you too, then you can pick one up from the next level racing website for only 299 euros or 249 pounds in the uk.

Now i think, it’s about time.

https://www.youtube.com/watch?v=ha0jSsrojIk