The active pen, Pro out of the slot, insert a paper clip into the hole and press inward Slide. The tray out of the system pull outward on the top Edge to unlock the clips, continue to pull outward and lift the back cover from the system. Disconnect the built in battery from the system board. Disconnect the camera cable from the system board disconnect the NFC cable from the system board. Disconnect the LCD cable from the system board. Disconnect the Pogo cable from the system board. Remove five screws from the built in battery lift the battery from the system disconnect the antenna cables from the wireless LAN card, remove the screw and pull the card from the slot disconnect the antenna cables from the wireless Wan cart, remove the screw and pull the card From the slot disconnect the camera cable from the camera, remove the screw carefully pry the camera out of the bezel and remove it, disconnect the NFC cables from the NFC card, carefully pry the NFC card up from the system and remove it, disconnect the touch control board From the system board disconnect the wireless LAN antenna cables from the wireless LAN card, disconnect the speaker, cable from the system board, remove the first speaker and remove the cables from the cable guides. Remove the other speaker disconnect the Pogo cable from the system board. Remove two screws and lift the Pogo cable from the system follow the numbered pattern and remove three screws: lift the thermal module from the system disconnect the speaker, cable from the system board, remove six screws flip the system board over and disconnect the fingerprint reader cable.

Remove the system board, remove a single screw, lift and remove the bracket peel the tape from the fingerprint reader and remove it, pull the tablet straight up to disconnect it from the keyboard Slide. The active pen, Pro out of the slot, insert a paper clip into the hole and press inward Slide.

https://www.youtube.com/watch?v=QMa5KL50vzY